Select one of the following firmware update methods: Methods.
Qfinder Pro displays the Update Firmware screen. Specify your QuTS hero username and password. Uses a complex algorithm to aggregate NICs and configure speed and duplex settings. Right click the device model on the list and then select Update Firmware. Transmits network packets using the Hash algorithm, which selects the same NIC slave for each destination MAC address. Transmits network packets sequentially to each network interface card in order to distribute the internet traffic among all the NICs. Similar to Balance-tlb, but offers additional load balancing for incoming IPv4 traffic.
Outgoing traffic is distributed based on the current load for each interface relative to the interface's maximum speed. Make sure your NAS and the PC are connected to the network correctly. If the interface fails, a slave interface takes over the MAC address of the failed interface. Incoming traffic is received by the current interface. Transmits the same network packets to all the network interface cards. If this primary interface becomes unavailable, the secondary interface will become active. Launch Qfinder Pro and refresh the list to see any QNAP NAS boxes on the local network The above worked for the following configuration: - Operating system version: MS Windows 10 圆4 patch 1607 - QNAP server model and firmware version: TS-409 with 3.3.3 (1003T) - Qfinder Pro version: 6.
0 kommentar(er)
